LG Hack Forum
http://www.lg-hack.info/cgi-bin/sn_forum.cgi


>> Forum Category: Additional functionality
http://www.lg-hack.info/cgi-bin/sn_forum.cgi?cid=2674&fct=showf


>> Forum Name: USB player and related tricks
http://www.lg-hack.info/cgi-bin/sn_forum.cgi?fct=gotoforum&cid=2674&fid=2677


>> Topic: Configuration Editor
http://www.lg-hack.info/cgi-bin/sn_forumr.cgi?cid=2674&fid=2677&tid=2690



In InStart service menu press menu button.
Or more simple method (thanks jopo) use only standard RCU: Press and hold MENU for 5 seconds, then enter 1105 and press OK

You'll see Installation menu
[image]http://s004.radikal.ru/i207/1002/0c/7d15b44b489bt.jpg[/image]

We need TV Link-loader

[image]http://s48.radikal.ru/i120/1002/37/7c09828cc818t.jpg[/image]


Receive from USB - Load configuration from file to TV
Send to USB - Save configuration to file
TV Link-Loader - Wait config information (from serial port?)

You can save config file ONLY on FAT/FAT32 patrition!!!
You can select file name from xxLH5000-ZB00001.TLL to xxLH5000-ZB99999.TLL (in file name used TV model name without panel size)

[image]http://i057.radikal.ru/1002/86/b505bc13f465t.jpg[/image]



[image]http://s51.radikal.ru/i134/1002/35/b646252c9c9ct.jpg[/image]

After load configuration file TV automaticaly shuts down.

Structure of file is very simple:
1. Channel names
on offset 0024(hex) and 007c(hex) we can see fist simbol of the first channel, shift 004c(hex) from first simbol of second name - the first simbol of second channel name... and so on.

after analogue part following radio part, after radio - digital channels.

We can name analog channels more than 5 simbols names and use some local sybbols (for example - cyrillic)
[image]http://s53.radikal.ru/i140/1002/e9/df0bdcc6c866t.jpg[/image]

2. Country selections
offset 0038hex) after first symbol second name of last analogue channel we can see symbols which define country group (in back order - UEUR for Russia)

3. Default menu item
offset 01A5(hex) after last country letter placed number of default menu item which appear after pressing menu button
00 Setup
01 Picture
02 Audio
03 Time
04 Options
05 Lock
06 Input
07 USB

Programms to edit TLL files placed here
only JLevi Programm
alternative link ftp://LG:LG@drew99.selfip.com:9292 (FTP work in passive mode!)

Posted By: Drew99 | Posted on: Jan 8, 2010 - 7:56am
Total Posts: 109 | Joined: Dec 17, 2009 - 11:56am



[quote]after analogue part following radio part, after radio - digital channels.[/quote]
Are you sure about that?


In my TLL file, first are analogue channels, then configuration part, then DTV channels and in the end the radio channels.



Posted By: koko5 | Posted on: Jan 8, 2010 - 9:29am
Total Posts: 6 | Joined: Jan 6, 2010 - 9:49am



Yes, I am sure. You can find my config files on my ftp - file xxlh5000-zb00002.tll contain analogue and digital channels (my operator does not provide radio).
Please try your config files in JLevi programm, it have three columns - analogue channels, radio and digital channels (unfortunatelly it have russian intarface. but clear to understand)



Posted By: Drew99 | Posted on: Jan 8, 2010 - 9:38am
Total Posts: 109 | Joined: Dec 17, 2009 - 11:56am



I looked through your file.
I think the configuration part is from offset 5748 to 12703. That's why I said that after "analogue part" is "configuration part"

Currently I put a TLL file on my TV edited with TLL view07 and TLLedit 2.1

Everything works fine

Did you look through my *.xls file in the other topic?





Posted By: koko5 | Posted on: Jan 10, 2010 - 3:06am
Total Posts: 6 | Joined: Jan 6, 2010 - 9:49am



In TLL file only first channel name have absolute address, all others have ralative addresses and depends of number of channels.

unfortunatelly i can't download this file :( (please send to my email drew99a at gmail)



Posted By: Drew99 | Posted on: Jan 10, 2010 - 7:59am
Total Posts: 109 | Joined: Dec 17, 2009 - 11:56am



In TLL file only first channel name have absolute address, all others have ralative addresses and depends of number of channels.

unfortunatelly i can't download this file :( (please send to my email drew99a at gmail)


check your e-mail.



Posted By: koko5 | Posted on: Jan 11, 2010 - 10:51am
Total Posts: 6 | Joined: Jan 6, 2010 - 9:49am



Hey, i just downloaded the TLLedit.exe but i only have russian LANG-Files.
Do you have a ENG-File or even better a GER-File ?

Thanx from Germany
CoZmo

Posted By: CoZmo73 | Posted on: Feb 16, 2010 - 2:24pm
Total Posts: 8 | Joined: Feb 16, 2010 - 2:18pm



I try to ask author to make english interface/



Posted By: Drew99 | Posted on: Feb 16, 2010 - 2:41pm
Total Posts: 109 | Joined: Dec 17, 2009 - 11:56am



I try to ask author to make english interface/


OK, thanks.


Posted By: CoZmo73 | Posted on: Feb 16, 2010 - 3:29pm
Total Posts: 8 | Joined: Feb 16, 2010 - 2:18pm



Did TllEdit3. Added English interface.



Posted By: JLevi | Posted on: Mar 6, 2010 - 2:20am
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



Did TllEdit3. Added English interface.



Thanks for the new version 3.1 and the English are gone but where the settings for DTV and Radio. In version 2.1 could be rearranged de radio programs and DTV channels. Wait reply


JovaniJo

Posted By: JovaniJo | Posted on: Mar 6, 2010 - 9:40am
Total Posts: 15 | Joined: Jan 10, 2010 - 9:20am



As in version 2. The right is the Sleeper (first maximized window).



Posted By: JLevi | Posted on: Mar 6, 2010 - 10:13am
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



As in version 2. The right is the Sleeper (first maximized window).



Thanks but it did not change send you a link to download my files TTL test.In version 2.1 works but why it is not in 3.1
http://dox.bg/files/dw?a=8ff979560c



JovaniJo

Posted By: JovaniJo | Posted on: Mar 6, 2010 - 10:28am
Total Posts: 15 | Joined: Jan 10, 2010 - 9:20am



Weil used these in the development, thank you. Show 49 TV, 22 FM, 147 DTV.



Posted By: JLevi | Posted on: Mar 6, 2010 - 10:44am
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



Update the file. All windows will be visible immediately.



Posted By: JLevi | Posted on: Mar 6, 2010 - 10:57am
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



Update the file. All windows will be visible immediately.



Congratulations, thanks and labor. The program worked perfectly. I hope my files to help you in developing the program. jj3@abv.bg


JovaniJo

Posted By: JovaniJo | Posted on: Mar 6, 2010 - 11:08am
Total Posts: 15 | Joined: Jan 10, 2010 - 9:20am



Are you talking about a v3.1 of the tll-editor ? I've only got the V2.1.
Do you have a link for me ?



Posted By: CoZmo73 | Posted on: Mar 6, 2010 - 11:10am
Total Posts: 8 | Joined: Feb 16, 2010 - 2:18pm



Programms to edit TLL files temporary placed here: ftp://LG:LG@drew99.selfip.com:9292



Posted By: JLevi | Posted on: Mar 6, 2010 - 11:14am
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



Hi JLevi,
you've done very well. Nice work.
biiiiig thnx



Posted By: CoZmo73 | Posted on: Mar 6, 2010 - 4:19pm
Total Posts: 8 | Joined: Feb 16, 2010 - 2:18pm



Friends !!

Where can I download last version of TLLEdit ??

// this one: ftp://LG:LG@drew99.selfip.com:9292 is not working anymore :( //



Posted By: riventel | Posted on: Apr 8, 2010 - 8:17am
Total Posts: 6 | Joined: Apr 8, 2010 - 8:13am



Friends !!

Where can I download last version of TLLEdit ??

// this one: ftp://LG:LG@drew99.selfip.com:9292 is not working anymore :( //



server is working!
Use passive FTP mode or try to connect by browser (IE, Firefox and Chrome working fine)



Posted By: Drew99 | Posted on: Apr 8, 2010 - 9:11am
Total Posts: 109 | Joined: Dec 17, 2009 - 11:56am



Use passive FTP mode or try to connect by browser (IE, Firefox and Chrome working fine)

I set it to passive and goes !!! Sorry for trouble - all is ok



Anyhow I have LH3000 (soft 3.63) and some problem to enter Instalation Menu.

You wrote: "In InStart service menu press menu button"

Could you give more detail step by step - idotproof manual" please ?

Thank you in advance



Posted By: riventel | Posted on: Apr 9, 2010 - 1:44am
Total Posts: 6 | Joined: Apr 8, 2010 - 8:13am



Here is a link to instructions for service menu and stick with the work of the Bulgarian has pictures
http://dox.bg/files/dw?a=265f91f68f

JovaniJo

Posted By: JovaniJo | Posted on: Apr 9, 2010 - 6:52am
Total Posts: 15 | Joined: Jan 10, 2010 - 9:20am





Posted By: riventel | Posted on: Apr 9, 2010 - 7:01am
Total Posts: 6 | Joined: Apr 8, 2010 - 8:13am



I tried TllEdit 3.2 to update (restore) the channel list on a xxLH5000.

1. I made a backup of the original channel settings (Send to USB)
2. Opened the saved .TLL file with TllEdit 3.2
3. Made NO CHANGES to the file
4. Saved this - unmodified! - file to USB (under a different file name)
5. Loaded the TllEdit saved file back into the TV
6. Loading the file goes perfectly but
7. When Updating channel map this error message is displayed: failed, try again.

Any ideas?

BTW, restoring the original backup file with the channel settings givess no errors at all.



Posted By: ariekanari | Posted on: Apr 9, 2010 - 12:18pm
Total Posts: 6 | Joined: Apr 8, 2010 - 12:21pm



In TllEdit 3.2 has an error. JLevi knows but will be corrected later. Use version 3.1 works perfectly.

JovaniJo

Posted By: JovaniJo | Posted on: Apr 9, 2010 - 12:32pm
Total Posts: 15 | Joined: Jan 10, 2010 - 9:20am



Version 3.1. works fine, indeed.



Posted By: ariekanari | Posted on: Apr 11, 2010 - 8:57am
Total Posts: 6 | Joined: Apr 8, 2010 - 12:21pm



first of all: thank you very much for this great tool, makes managing the channels much easier.

don't know if this kind of input is wanted, but features i really miss: buttons not only to move up/down, but to the top/bottom of the list / the option to assign the position directly by entering a number (ordering 200+ digital channels is kind of a click-orgy)

Posted By: cyp | Posted on: Apr 14, 2010 - 11:17am
Total Posts: 1 | Joined: Apr 14, 2010 - 11:08am



Hi,

I'm wondering if your ttl edit retains other settings beside tv/radio channels? I believe there is also saved settings like loudness of sound when tv is turned on and much more.





Posted By: uzivatel | Posted on: Apr 14, 2010 - 1:20pm
Total Posts: 99 | Joined: Dec 17, 2009 - 12:01pm



Added version 3.03. Fixed bugs.



Posted By: JLevi | Posted on: Jun 10, 2010 - 3:45am
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



Added version 3.03. Fixed bugs.


Thank you.

Please tell us more how to use more.txt
#Name ; Adress
TIME_ZONE ; 6063

???



Posted By: riventel | Posted on: Jun 10, 2010 - 7:11am
Total Posts: 6 | Joined: Apr 8, 2010 - 8:13am



# Name; Adress
TIME_ZONE; 6063

Address cell in the block settings (brightness, contrast and other settings). For example, address the time zone. This is for those who study *. tll file. Name - proizvlnaya line.



Posted By: JLevi | Posted on: Jun 10, 2010 - 9:42am
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



Hi,
Where can i download TllEdit Version 3.03 without the bugs from Version 3.2?

Thank you
Greetings Lobo



Posted By: trex451 | Posted on: Jun 15, 2010 - 6:02am
Total Posts: 1 | Joined: Jun 15, 2010 - 5:56am



link in first message:
ftp://LG:LG@drew99.selfip.com:9292

(FTP in passive mode!)



Posted By: Drew99 | Posted on: Jun 15, 2010 - 1:27pm
Total Posts: 109 | Joined: Dec 17, 2009 - 11:56am



Hi, it seems that this editor doesn't work with 2010 models. I have LD550 and it displays "unexpected file format" error. I have uploaded the TLL file from my TV here: http://rapidshare.com/files/400905257/xxLD550-ZC00001_-_Copy__2_.TLL.html

I hope this will help to make it work



Posted By: cnupy | Posted on: Jun 20, 2010 - 12:51am
Total Posts: 4 | Joined: Jun 18, 2010 - 7:26am



Looked xxLD550-ZC00001_-_Copy__2_.TLL formats differ.



Posted By: JLevi | Posted on: Jun 20, 2010 - 10:21pm
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



How significant is difference? Would you be able to update TLLEdit to read LDXXX files?



Posted By: cnupy | Posted on: Jun 21, 2010 - 12:39am
Total Posts: 4 | Joined: Jun 18, 2010 - 7:26am



After working on this issue. These files have much in common



Posted By: JLevi | Posted on: Jun 21, 2010 - 3:31am
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



hi, thanx for this editor

i have an LG 37LD450 and loaded the file xxLD450-ZA00001.TLL from the TV-Set
but i cannot open it with tlledit 3.4 ---> "unexpectet file-format"

what can i do?

thx a lot!




Posted By: grummel2005 | Posted on: Jun 30, 2010 - 8:51am
Total Posts: 29 | Joined: Jun 30, 2010 - 8:43am



Hi there.

I am interested in a working Editor for TTl Files, cause the functions of the LG-televisions are a mess (no erasing etc.)

Unfortunatly i cannot connect to the ftp of drew. i tried it via firefox and with smartftp (passive mode), but i did not have succes.

Please help me.

Greetings from germany, Matze



Posted By: Matze | Posted on: Jun 30, 2010 - 1:43pm
Total Posts: 1 | Joined: Jun 30, 2010 - 1:39pm



[url=http://narod.ru/disk/22336479000/TllEdit_3_4.exe.html]TllEdit_3_4.exe[/url]



Posted By: JLevi | Posted on: Jun 30, 2010 - 3:44pm
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



link on first page: http://www.mediafire.com/?sharekey=3e44ad8894d825d067cd7f7bd65f7eefe6ed6fa4eb207a514df0d6082f1c2cd0



Posted By: Drew99 | Posted on: Jun 30, 2010 - 3:50pm
Total Posts: 109 | Joined: Dec 17, 2009 - 11:56am



i tried it but cannot open my files with your version 3.4
what should i do?

and under the questionmark is the vesion showing 3.3 - is this okai?



Posted By: grummel2005 | Posted on: Jul 1, 2010 - 1:12am
Total Posts: 29 | Joined: Jun 30, 2010 - 8:43am



i tried it but cannot open my files with your version 3.4
what should i do?

and under the questionmark is the vesion showing 3.3 - is this okai?



this programm work only with 2009 year TVs (LH-LU-LF2510)



Posted By: Drew99 | Posted on: Jul 1, 2010 - 1:32am
Total Posts: 109 | Joined: Dec 17, 2009 - 11:56am



could i send you my xxLD450-ZA00001.TLL to help developing an update for your programm?



Posted By: grummel2005 | Posted on: Jul 1, 2010 - 3:23am
Total Posts: 29 | Joined: Jun 30, 2010 - 8:43am



could i send you my xxLD450-ZA00001.TLL to help developing an update for your programm?



yes of course
drew99a@gmail.com

please comment your file (country settings, number and type of channels, some specific settings etc)



Posted By: Drew99 | Posted on: Jul 1, 2010 - 3:57am
Total Posts: 109 | Joined: Dec 17, 2009 - 11:56am



it is on the way


btw.
i would like to to a german-language-file

is it possible only to translate the eng.txt and save it to ger.txt or do you have to do more on this?
what do i have to translate?


Posted By: grummel2005 | Posted on: Jul 1, 2010 - 8:42am
Total Posts: 29 | Joined: Jun 30, 2010 - 8:43am



it is on the way


btw.
i would like to to a german-language-file

is it possible only to translate the eng.txt and save it to ger.txt or do you have to do more on this?
what do i have to translate?


thank you for your files (could you explane difference between files?)

if you can translate language file (words in eng.txt)- send this file to me and JLevi




Posted By: Drew99 | Posted on: Jul 1, 2010 - 11:12am
Total Posts: 109 | Joined: Dec 17, 2009 - 11:56am



there is only the difference of some programms in the order

i will send the translated version tomorrow - i take the english one and i will check later, if this is all translated - okai?



Posted By: grummel2005 | Posted on: Jul 1, 2010 - 12:05pm
Total Posts: 29 | Joined: Jun 30, 2010 - 8:43am



german language file is on the way
i had a little time to do this



Posted By: grummel2005 | Posted on: Jul 1, 2010 - 1:14pm
Total Posts: 29 | Joined: Jun 30, 2010 - 8:43am



Thank you for your help. Added German interface in version 3.05.



Posted By: JLevi | Posted on: Jul 2, 2010 - 3:58am
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



File - Edit - View
should be
Datei - Bearbeiten - Ansicht


could you do anything with my TLL-Files?



Posted By: grummel2005 | Posted on: Jul 2, 2010 - 11:11am
Total Posts: 29 | Joined: Jun 30, 2010 - 8:43am



Program updated. Thank you for your comment.
A new type of file has not yet been studied. Tweaks become more.



Posted By: JLevi | Posted on: Jul 2, 2010 - 12:16pm
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



TLL 3.5 still doesn't work with 2010 models (LD550, LD450) :(



Posted By: cnupy | Posted on: Jul 2, 2010 - 12:17pm
Total Posts: 4 | Joined: Jun 18, 2010 - 7:26am



The 2010 model has not yet mastered. Everything is under testing.



Posted By: JLevi | Posted on: Jul 2, 2010 - 2:17pm
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



TllEdit_2010_Test_3.ehe added. Version test for TV in 2010.



Posted By: JLevi | Posted on: Jul 3, 2010 - 2:31am
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



i loaded the TLL-File - okai

i send you a file of a full-scan of my fathers tv set without changing anything
---> xxLD450-ZA99999.TLL

its on the way

thx


b.t.w.
how can i play video files - in the announcement of the tv it says mkv, avi ..., but i cannot fild a menue to to this via usb - only music and pictures

Posted By: grummel2005 | Posted on: Jul 3, 2010 - 4:30am
Total Posts: 29 | Joined: Jun 30, 2010 - 8:43am



how can i play video files - in the announcement of the tv it says mkv, avi ..., but i cannot fild a menue to to this via usb - only music and pictures

this is offtopic here (just enable video in "ezadjust-tool options3" service menu)



Posted By: Drew99 | Posted on: Jul 3, 2010 - 6:11am
Total Posts: 109 | Joined: Dec 17, 2009 - 11:56am



sorry for OT, but i cannot find anything in this forum about this

how do i come to ezadjust-tool options3?

thx

maybe via email?



Posted By: grummel2005 | Posted on: Jul 3, 2010 - 7:10am
Total Posts: 29 | Joined: Jun 30, 2010 - 8:43am



it is very popular topic on all LG forums (even this forum)



Posted By: Drew99 | Posted on: Jul 3, 2010 - 7:20am
Total Posts: 109 | Joined: Dec 17, 2009 - 11:56am



TllEdit_2010_Test_3.ehe added. Version test for TV in 2010.



I've tested it. It opened and edit the file fine. Saved the file and loaded it in TV, but after rebooting all programs were missing :( Would you like to send the file after editing?



Posted By: cnupy | Posted on: Jul 4, 2010 - 1:57am
Total Posts: 4 | Joined: Jun 18, 2010 - 7:26am



sorry but i didn't found anything about "ezadjust-tool" in this forum

all the tricks from other forums didn`t funcion also
and i think youre the best to ask

my firmware for the LG LD450-ZA is 03.00.12

thx for help



Posted By: grummel2005 | Posted on: Jul 4, 2010 - 5:03am
Total Posts: 29 | Joined: Jun 30, 2010 - 8:43am



sorry but i didn't found anything about "ezadjust-tool" in this forum

all the tricks from other forums didn`t funcion also
and i think youre the best to ask

my firmware for the LG LD450-ZA is 03.00.12

thx for help


Try this:
http://www.hifi-forum.de/viewthread-145-2767.html

Viel Erfolg, bei mir hat es alle genau so funktioniert, wie in der Anleitung beschrieben.
Gru aus der Heimat ;-)



Posted By: CoZmo73 | Posted on: Jul 4, 2010 - 5:12am
Total Posts: 8 | Joined: Feb 16, 2010 - 2:18pm



sorry but i didn't found anything about "ezadjust-tool" in this forum



You give your tll file from Instart service menu, ezadjust - is another
tool option 1-2-3-4-5 - is a part of this menu



Posted By: Drew99 | Posted on: Jul 4, 2010 - 5:23am
Total Posts: 109 | Joined: Dec 17, 2009 - 11:56am




Try this:
http://www.hifi-forum.de/viewthread-145-2767.html

Viel Erfolg, bei mir hat es alle genau so funktioniert, wie in der Anleitung beschrieben.
Gru aus der Heimat ;-)



Danke fr den Hinweis, aber was davon soll funktionieren - diese Anleitung ist leider nur kraut und rben ;(
aber vielleicht bin ich auch nur zu doof ;(



Posted By: grummel2005 | Posted on: Jul 4, 2010 - 5:30am
Total Posts: 29 | Joined: Jun 30, 2010 - 8:43am




You give your tll file from Instart service menu, ezadjust - is another>


i know that there are two menues - instart is ok and functioning

but you said that i will find something about "ezadjust-tool" in this forum - but i didn't found it



tool option 1-2-3-4-5 - is a part of this menu>


what do you mean with this??
how i come to "this menue"



Posted By: grummel2005 | Posted on: Jul 4, 2010 - 5:33am
Total Posts: 29 | Joined: Jun 30, 2010 - 8:43am




You give your tll file from Instart service menu, ezadjust - is another>


i know that there are two menues - instart is ok and functioning

but you said that i will find something about "ezadjust-tool" in this forum - but i didn't found it



tool option 1-2-3-4-5 - is a part of this menu>


what do you mean with this??
how i come to "this menue"


Buy a Universal-Remote and enter Code 0119 (to the AUX), than you can access the menu by pressing the EPG-Key (most remotes) . Now go to Tool-Option3-Menu and set DivX to "HD". Thants it.
If you have a firmware 3.15 you can press OK(original remote)+ OK (TV) >>> EZ ADJUST Password "0000". I'll not recomment to downgrade the firmare to 3.15.

btw. die Anleitung ist wirklich sehr unbersichtlich, aber es funktioniert.
Kann dir nur empfehlen bei ebay oder so eine Medion-Universal-FB zu kaufen, damit klappt es auf jeden Fall.
Gru
CoZmo


SORRY JLevi for all the OT ...

Posted By: CoZmo73 | Posted on: Jul 4, 2010 - 5:58am
Total Posts: 8 | Joined: Feb 16, 2010 - 2:18pm




You give your tll file from Instart service menu, ezadjust - is another>


i know that there are two menues - instart is ok and functioning

but you said that i will find something about "ezadjust-tool" in this forum - but i didn't found it



tool option 1-2-3-4-5 - is a part of this menu>


what do you mean with this??
how i come to "this menue"



there are two service menu in LG TVs - Instart and EzAdjust (tool option - is a parts of ezadjust menu)

i don't know how you go to service menu (if you are use "LED and music" - play another file, If use novii - press another button... etc)





Posted By: Drew99 | Posted on: Jul 4, 2010 - 6:07am
Total Posts: 109 | Joined: Dec 17, 2009 - 11:56am




If you have a firmware 3.15 you can press OK(original remote)+ OK (TV) >>> EZ ADJUST Password "0000". I'll not recomment to downgrade the firmare to 3.15.


he have LD series TV!!!!



Posted By: Drew99 | Posted on: Jul 4, 2010 - 6:11am
Total Posts: 109 | Joined: Dec 17, 2009 - 11:56am




If you have a firmware 3.15 you can press OK(original remote)+ OK (TV) >>> EZ ADJUST Password "0000". I'll not recomment to downgrade the firmare to 3.15.


he have LD series TV!!!!


hm, ok, I've misunderstood that.
Nevertheless he can try it using a universal remote (i recommend a Medion) ...
read this:
http://www.hifi-forum.de/viewthread-145-3151.html



Posted By: CoZmo73 | Posted on: Jul 4, 2010 - 6:23am
Total Posts: 8 | Joined: Feb 16, 2010 - 2:18pm



wieso downgrade to 3.15 - auf dem TV ist erst 03.00.12
wie komme ich zum update auf 3.15?

immer mehr probleme ;(



Posted By: grummel2005 | Posted on: Jul 4, 2010 - 6:27am
Total Posts: 29 | Joined: Jun 30, 2010 - 8:43am



wieso downgrade to 3.15 - auf dem TV ist erst 03.00.12
wie komme ich zum update auf 3.15?

immer mehr probleme ;(



even don't try this!!!! (this firmware ONLY for 2009 year LH-LU-series)






Posted By: Drew99 | Posted on: Jul 4, 2010 - 6:29am
Total Posts: 109 | Joined: Dec 17, 2009 - 11:56am



wieso downgrade to 3.15 - auf dem TV ist erst 03.00.12
wie komme ich zum update auf 3.15?

immer mehr probleme ;(


Vergiss das wieder, hatte bersehen, das du einen LD450 hast und keinen LG/LH...



Posted By: CoZmo73 | Posted on: Jul 4, 2010 - 6:46am
Total Posts: 8 | Joined: Feb 16, 2010 - 2:18pm



With TllEdit_2010_Test_3.exe i can load the TLL-File from the TV set an chance everything.
When i load then this saved file to the TV set it says there are no programmes programmed on it

what should i do?



Posted By: grummel2005 | Posted on: Jul 4, 2010 - 12:02pm
Total Posts: 29 | Joined: Jun 30, 2010 - 8:43am



videos are running now - i programmed my logitech harmony with found pronto codes

now i only need to sort the programms

would it be possible to mix analog-TV and digital-TV programms?

1 ARD HD - digital
2 ZDF HD - digital
3 SAT.1 - analog
4 RTL - analog
.
.
.
10 Eins Plus - digital
11 Eins Festival - digital
.
.
.



Posted By: grummel2005 | Posted on: Jul 5, 2010 - 4:44am
Total Posts: 29 | Joined: Jun 30, 2010 - 8:43am



videos are running now - i programmed my logitech harmony with found pronto codes

now i only need to sort the programms

would it be possible to mix analog-TV and digital-TV programms?

1 ARD HD - digital
2 ZDF HD - digital
3 SAT.1 - analog
4 RTL - analog
.
.
.
10 Eins Plus - digital
11 Eins Festival - digital


there are three lists in TV (analogue tv, radio and digital tv), each of them has own numbering.
As solution you can use "favorite list" (button FAV)




Posted By: Drew99 | Posted on: Jul 5, 2010 - 6:33am
Total Posts: 109 | Joined: Dec 17, 2009 - 11:56am



grummel2005
by the way! can you download firmware from your TV?
this is the method: http://www.lg-hack.info/cgi-bin/sn_forumr.cgi?fid=2679&cid=2675&tid=2767&pg=2&sc=20&x=0



Posted By: Drew99 | Posted on: Jul 5, 2010 - 7:15am
Total Posts: 109 | Joined: Dec 17, 2009 - 11:56am



1. i know, that there are three lists, but how can i mix it
i can do thme programms to favorites, but there i cannot move them and change the position, as far as i know - they are in the postition like in the three lists

2. no, i have no computer at the tv, because i have no laptop and cannot do the tv to my comuter at home because its my fathers TV and at his home - sorry.
i only can bring things on an usb-stick and bring it home and vice versa

3. why i can load TLLs to Test3, but cannot bring them to TV? do you need anything else?



Posted By: grummel2005 | Posted on: Jul 5, 2010 - 7:43am
Total Posts: 29 | Joined: Jun 30, 2010 - 8:43am



thx for TLLEdit 4.1, but when i delete a second programm TLLEdit crashes

i mark a programm with a left mouseclick and press del on the computer-keyboard or with the mouse on the red x
then i mark an other programm with a left mouseclick and press del on the computer-keyboard or with the mouse on the red x

then ... crash



Posted By: grummel2005 | Posted on: Jul 5, 2010 - 4:32pm
Total Posts: 29 | Joined: Jun 30, 2010 - 8:43am



i tried TLLEdit 4.1

nevertheless that it crashes sometimes, i put the list on the tv but it sais "not programmed", so there is still something wrong with the TLL thet will produced via TLLEdit 4.1

the saved TTL, that is not functioning is on the way via mail to you



Posted By: grummel2005 | Posted on: Jul 6, 2010 - 4:21am
Total Posts: 29 | Joined: Jun 30, 2010 - 8:43am



Not good at English writing through a translator. I can not make out the meaning of the last Probrem. Help



Posted By: JLevi | Posted on: Jul 6, 2010 - 12:12pm
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



sorry but the translater was my head

i'll try again a little bit easier



1. i know, that there are three lists, but how can i mix it
i can bring the programms to the favorites
but i cannot sort them in the favorites area

2. no, i cannot load the firmware from the tv
its my fathers tv and the tv is at his home and i don't have a computer there
i only can work with an usb-stick

3. i tried TLLEdit 4.1 and it crashes sometimes

4. i put xxLD450-ZA99990.TLL (saved with TLL-Edit 4.1) on the tv
but tv sais "not programmed" again
the saved TTL, that is not functioning is on the way via mail to you

5. when i delete one programm it's o.k.
but when i delete a second programm TLLEdit crashes
i do it like this:
i mark a programm with a left mouseclick and press del on the computer-keyboard or with the mouse on the red x
then i mark an other programm with a left mouseclick and press del on the computer-keyboard or with the mouse on the red x
then ... crash ... the whole programm is down and i have to start again

6. is TLL-edit storing somewhere else as in his folder informations?

i hope you understand it - sorry for my bad english






Posted By: grummel2005 | Posted on: Jul 6, 2010 - 12:22pm
Total Posts: 29 | Joined: Jun 30, 2010 - 8:43am



knock knock



Posted By: grummel2005 | Posted on: Jul 10, 2010 - 5:48am
Total Posts: 29 | Joined: Jun 30, 2010 - 8:43am



I understood the problem, I will correct. Soon I shall lay out a new version.



Posted By: JLevi | Posted on: Jul 10, 2010 - 8:35am
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



thx a lot
no sweat
i only wanted to have a sign of live



Posted By: grummel2005 | Posted on: Jul 10, 2010 - 9:36am
Total Posts: 29 | Joined: Jun 30, 2010 - 8:43am



The program has bugs. Now I deal with them. Thank you for your help.



Posted By: JLevi | Posted on: Jul 11, 2010 - 2:49am
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



sorry for a question because i dont undestand

are you working on a fixed version or ist 4.1 the last version?

it would be nice, if we cpuld bring the programmlist to tv - thats all

thx a lot for your work!!!!



Posted By: grummel2005 | Posted on: Jul 13, 2010 - 12:41pm
Total Posts: 29 | Joined: Jun 30, 2010 - 8:43am



Laid TllEdit 4.02. Corrected bugs. Improved work with a block of data.



Posted By: JLevi | Posted on: Aug 7, 2010 - 6:52am
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



wow - thx

i will test it and reply

thx a lot !!!



Posted By: grummel2005 | Posted on: Aug 7, 2010 - 7:40am
Total Posts: 29 | Joined: Jun 30, 2010 - 8:43am



i took a list from tv set and loaded it with 4.2
after saving and loading into tv set it said, that no list is on tv

and now?



Posted By: grummel2005 | Posted on: Aug 8, 2010 - 6:17am
Total Posts: 29 | Joined: Jun 30, 2010 - 8:43am



Send the file to change and after the change.



Posted By: JLevi | Posted on: Aug 8, 2010 - 10:13am
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



the files are on the way to you:

xxLD450-ZA00010.TLL - i loaded from the TV-set

xxLD450-ZA00011.TLL - i opened xxLD450-ZA00010.TLL into TLLEdit4.2 and saved the file xxLD450-ZA00011.TLL without any changes

xxLD450-ZA00012.TLL - i opened xxLD450-ZA00010.TLL into TLLEdit4.2 and deleted all Radio-Programms - only one is left - and saved the file xxLD450-ZA00012.TLL




Posted By: grummel2005 | Posted on: Aug 9, 2010 - 3:00am
Total Posts: 29 | Joined: Jun 30, 2010 - 8:43am



Thank you for your files. But the causes are not found (think computers with a different digit on different open and save files). We must wait for a decision from the owners of TV 2010.



Posted By: JLevi | Posted on: Aug 9, 2010 - 1:46pm
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



Hi,

I have a 42LD420 and tried TLLeedit (which is very good-thank you!)...I can delete all radio stations and everything is fine; but when I delete a single DTV channel, *all* DTV channels are gone (on the TV).
Can I send you the tll files so you can check on that problem? (To which email?)

Thanks,
Patrick

Posted By: Patrick | Posted on: Aug 17, 2010 - 1:28am
Total Posts: 2 | Joined: Aug 17, 2010 - 1:20am



For JLevi:

I have some problems with the program "TLLEDIT" 4.02.

Where can I send my files TLL and my questions?

Thanks
lele



Posted By: lelelghack | Posted on: Aug 17, 2010 - 11:41am
Total Posts: 3 | Joined: Aug 17, 2010 - 11:27am



I read your comments, make your changes.



Posted By: JLevi | Posted on: Aug 19, 2010 - 11:50am
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



Hi,
How to do set "Channel Auto update" to OFF in TV LH3000?

Thanks.



Posted By: lelelghack | Posted on: Aug 19, 2010 - 3:52pm
Total Posts: 3 | Joined: Aug 17, 2010 - 11:27am



Hi,

I have a 42LD420 and tried TLLeedit (which is very good-thank you!)...I can delete all radio stations and everything is fine; but when I delete a single DTV channel, *all* DTV channels are gone (on the TV).
Can I send you the tll files so you can check on that problem? (To which email?)

Thanks,
Patrick


Hi again,

I uploaded my files here: [url]http://rapidshare.com/files/414021745/LD420.zip[/url]

Explanation:
xxLD420-ZA00001.tll: the original file from my TV, untouched
xxLD420-ZA00002.tll: removed all radio stations with TLLEdit 4.2, working fine on TV
xxLD420-ZA00003.tll: removed just one DTV channel, now ALL DTV channels are gone on TV

Thanks for helping!

Patrick



Posted By: Patrick | Posted on: Aug 20, 2010 - 2:27am
Total Posts: 2 | Joined: Aug 17, 2010 - 1:20am



Hi,
How to do set "Channel Auto update" to OFF in TV LH3000?

Thanks.



you should use firmware version 3.63 or newer (at this time avaliable v3.66)



Posted By: Drew99 | Posted on: Aug 20, 2010 - 1:11pm
Total Posts: 109 | Joined: Dec 17, 2009 - 11:56am



Hi,
How to do set "Channel Auto update" to OFF in TV LH3000?

Thanks.



you should use firmware version 3.63 or newer (at this time avaliable v3.66)



I use firmware version 3.65 but not find "Channel Auto update" in TV menu.





Posted By: lelelghack | Posted on: Aug 20, 2010 - 4:10pm
Total Posts: 3 | Joined: Aug 17, 2010 - 11:27am



"Options" > "Channel Auto Update"

(you should have at least one digital channel)



Posted By: Drew99 | Posted on: Aug 21, 2010 - 5:45am
Total Posts: 109 | Joined: Dec 17, 2009 - 11:56am



Just tried TllEdit 4.2 on 2010 PJ model. Edited and sorted all analog channels just fine,
only the Band column is incorrect: Cable and V/UHF are exactly opposite as they should be.

However the settings in "More options" are all empty except Country and Menu Item, and changing e.g. Teletext Language has no effect. Does this work right on 2009 models?




Posted By: jopo | Posted on: Oct 14, 2010 - 1:45pm
Total Posts: 40 | Joined: Oct 5, 2010 - 2:06am



However the settings in "More options" are all empty except Country and Menu Item, and changing e.g. Teletext Language has no effect. Does this work right on 2009 models?


Yes, it work fine on 2009year models (i have lh5000)



Posted By: Drew99 | Posted on: Oct 14, 2010 - 1:52pm
Total Posts: 109 | Joined: Dec 17, 2009 - 11:56am



Hmm, offsets in data block are different:

0x2525 & 0x2529 Audio 1/2
0x25d1 Menu Lang
0x25d9 & 0x25dd Subtitle 1/2
0x2801 Teletext (doesn't seem to work)



Posted By: jopo | Posted on: Oct 14, 2010 - 3:10pm
Total Posts: 40 | Joined: Oct 5, 2010 - 2:06am



as i know - tlledit automatically detect tll file version (2009 or 2010)

try to reset your TV to factory defaults (sometimes TV make wrong files).



Posted By: Drew99 | Posted on: Oct 14, 2010 - 3:19pm
Total Posts: 109 | Joined: Dec 17, 2009 - 11:56am



After complete TV reset the offsets are still as I wrote above. Seems plasma TVs have a bit different configuration Data block than TllEdit assumes.



Posted By: jopo | Posted on: Oct 15, 2010 - 4:23am
Total Posts: 40 | Joined: Oct 5, 2010 - 2:06am



Hi,
i have used the configuration editor (v4.02) to read the file of my 22LE5500. This seems to work. I then have build a version based on the
sources available and found, that this version does not work. It seems that the file format has changed ...
Do the sources match version 4.02 ? Is the file format somewhere officially documented ?

Thanks Bernd



Posted By: bko | Posted on: Oct 21, 2010 - 7:39am
Total Posts: 2 | Joined: Oct 21, 2010 - 7:15am



Is the file format somewhere officially documented ?



There are no any official documentation about this feature You can analyze TLL file in hex editor (very simple structure).



Posted By: Drew99 | Posted on: Oct 21, 2010 - 2:04pm
Total Posts: 109 | Joined: Dec 17, 2009 - 11:56am



I have looked (not too deep) into my channel list and found quite some obvious data, but there are some areas in the file,
which seem to garbage (at least for me). I need to modify/add some entries to deal with the different APID values to get
the different audio tracks, but that's not possible, if i don't know, what these "garbage areas" mean ...

Ciao Bernd



Posted By: bko | Posted on: Oct 21, 2010 - 2:32pm
Total Posts: 2 | Joined: Oct 21, 2010 - 7:15am



easiest way is: save tll file, make changes in menu, than save new file and compare



Posted By: Drew99 | Posted on: Oct 21, 2010 - 3:05pm
Total Posts: 109 | Joined: Dec 17, 2009 - 11:56am



sorry, I wanted to try TllEdit, I realized that to enter IN_START menu i must pressing ok on the remote control and TV, but I do not work ... I state that I have unlocked the USB port with the procedure note and now I have the firmware 3.66 (32lh3000)

but I can downgrade to 3.66> 3.15 without problems?




Posted By: ilsaggio | Posted on: Dec 28, 2010 - 6:41am
Total Posts: 5 | Joined: Dec 28, 2010 - 6:35am



ilsaggio
There are many ways to enter into service menu and firmware 3.15 is worst of them
(by the way - INSTART menu combination is "menu-menu" )



Posted By: Drew99 | Posted on: Dec 28, 2010 - 1:09pm
Total Posts: 109 | Joined: Dec 17, 2009 - 11:56am



but I can also access in the menu INSTART on firmware 3.66?
Menu-menu does not work





Posted By: ilsaggio | Posted on: Dec 29, 2010 - 5:10am
Total Posts: 5 | Joined: Dec 28, 2010 - 6:35am



http://openlgtv.org.ru/wiki/index.php/IR_Hack



Posted By: jenya | Posted on: Dec 29, 2010 - 5:54am
Total Posts: 572 | Joined: Jan 12, 2010 - 12:30am



but there are problems if I downgrade to 3.15 and i enter in INSTART menu from there ?




Posted By: ilsaggio | Posted on: Dec 29, 2010 - 2:44pm
Total Posts: 5 | Joined: Dec 28, 2010 - 6:35am



If you want to only use TLLEdit, you don't need to enter InStart menu.

You just need to enter Installation menu, which is easily done by your TV remote:

Press and hold MENU for 5 seconds, then enter 1105 and press OK.



Posted By: jopo | Posted on: Dec 29, 2010 - 3:00pm
Total Posts: 40 | Joined: Oct 5, 2010 - 2:06am



don't work
I hold down the menu button on the remote for 5 seconds and then I type in 1105 but does not work

[quote]In InStart service menu press menu button. You'll see Installation menu
[/quote]
first post




Posted By: ilsaggio | Posted on: Dec 30, 2010 - 6:22am
Total Posts: 5 | Joined: Dec 28, 2010 - 6:35am



sorry...work !!! press ok !!!
i'm stupid :D

Posted By: ilsaggio | Posted on: Jan 3, 2011 - 8:35am
Total Posts: 5 | Joined: Dec 28, 2010 - 6:35am



Jopo!
thank you!

[off]did you know another "menus"? (for example "light sensor calibration")[/off]



Posted By: Drew99 | Posted on: Jan 3, 2011 - 2:27pm
Total Posts: 109 | Joined: Dec 17, 2009 - 11:56am



Hi All,
does anyone know if configuration editor can be userd with 42SL9000 ?
or how InStart service menu can be accessed?

Thank You



Posted By: diablo43000 | Posted on: Jan 11, 2011 - 4:10am
Total Posts: 1 | Joined: Jan 11, 2011 - 3:56am



(Nearly) Everything works fine. I downloaded the list from the TV and loaded it in TIIEdit. No Problem at all and works just perfect. In the screenshot you can see the only thing i have changed. I have put the marked station on 4th place, it was before way down the list. Saved and uploaded to the TV. Afterwords all DTV channels were gone except of 6. Importing the original list was no problem and worked perfect.

Maybe the List is changed in the Saving Process so that the TV can't read it correct any more. Or could it relate to the fact that i have had favourite List on the TV? Maybe that couses the fault...

I would like to sort my programs this way because the TV is a pain in the Ass when it comes to sorting the programs.

[image]http://img810.imageshack.us/img810/6455/45160666.jpg[/image]

Posted By: meier0815 | Posted on: Mar 19, 2011 - 8:47pm
Total Posts: 1 | Joined: Mar 19, 2011 - 8:23pm



I have he same problem with am 42LD750 and TLLEdit 4.02. After I moved only onne DTV-channel in TLLEdit up, all (whitout 6) DTV-channels are gone.
To analyze this problem
1.st I have saved the original tll-file xxLD750-ZA00001.TLL
2.nd I moved the 4th program to 3 (on the TV) and save the editet tll-file to xxLD750-ZA00002.TLL
3.th I have editet the original tll-file with TLLdit 4.02 and also moved the 4th program to 3 and saved it to xxLD750-ZA00003.TLL
Normally the files xx02.tll and xx03.tll must the same, but if you compare it, there are difference like an offset of 2
x017ed original 02 tlledit 00
x070c4 original 07 tlledit 05
x07174 original 0b tlledit 09 and so on.

Could someone contact the author JLevi? If neccesary I woul send him my files.

tuner



Posted By: tuner | Posted on: Mar 29, 2011 - 11:38am
Total Posts: 1 | Joined: Mar 29, 2011 - 10:58am



I have problems with tlledit... When I try to open the file from my 32LD650-SA it just starts consuming RAM and it stays stuck.

The file can be downloaded from here http://rapidshare.com/files/455176235/xxLD650-SA00001.TLL



Posted By: jpdevillers | Posted on: Mar 30, 2011 - 4:06pm
Total Posts: 3 | Joined: Mar 30, 2011 - 4:03pm



I bought a TV LD. Now you can make a normal program. Going to work.



Posted By: JLevi | Posted on: Apr 3, 2011 - 2:42am
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



Hey JLevi! Good news, I was just able to put channel names with a Hex Editor en my LD650 tll file. The names start at offset 0x2A and each channel is separated by 78 bytes.



Posted By: jpdevillers | Posted on: Apr 3, 2011 - 3:18pm
Total Posts: 3 | Joined: Mar 30, 2011 - 4:03pm



Hi JLevi,

great work! It would be nice if you could share your knowledge about channel info structures with us on openlgtv.org.ru IRC chat ([url]http://webchat.freenode.net/?channels=openlgtv[/url]). At least i want to ask you for the source code of your nice tool. Maybe we could integrate channel sorting functionality in LGMOD / OPENLGTV BCM customized firmware then.

Regards

sirius

Posted By: sirius | Posted on: Jul 26, 2011 - 2:30am
Total Posts: 161 | Joined: Sep 8, 2010 - 5:32pm



Now write a new version of tlledit. lay out all the sources at the end.



Posted By: JLevi | Posted on: Aug 3, 2011 - 3:21pm
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



Hi JLevi,

nice to hear that Btw. how did you found channel info structure? Did you use IDA for reversing it from RELEASE?
I think this structure knowledge could be used to to implement a better channel sorting or maybe channel switching functions in WEBUI's of LGMOD / OPENLGTV BCM then...

sirius

Posted By: sirius | Posted on: Aug 4, 2011 - 5:23am
Total Posts: 161 | Joined: Sep 8, 2010 - 5:32pm



I do not know much English and did not understand the question.



Posted By: JLevi | Posted on: Aug 4, 2011 - 11:29am
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



Dear Jelvi,
I have a LG 42LW570s and want to configurate my Channel List with your Programm TLLEdit 4.2 , but my Tll file from my TV is not supported by your Programm. I hope you can make a new programm to support my Televison. If you want i can sent my Tll file to you, to help you
Or gives a alternative programm to TLLEdit ?
Thanks



Posted By: killermiller | Posted on: Aug 8, 2011 - 9:28am
Total Posts: 1 | Joined: Aug 8, 2011 - 9:20am



JLevi,
sirius meant that we would like to get the sources of yours nice tool to implement simmilar functionality to our alternative firmware for Broadcom platform based LG TVs - OpenLGTV BCM.




Posted By: xeros | Posted on: Aug 8, 2011 - 1:28pm
Total Posts: 122 | Joined: Nov 29, 2010 - 7:19am



Hi,

las year i bought my father an LG 37LD450 and with your help and tlledit 4.2 i got finally the updated and cleared list on the tv-set.

now i made a channel search again, put the tll on an usb-stick, edited the file on my pc and brought it to the tv-set again

but now, theres no functionable list on the tv set

not one program

i did the same as last year

the file from last year i can bring on the tv-set and it will function 100%

what should i do?

thx a lot



Posted By: grummel2005 | Posted on: Oct 11, 2011 - 8:17am
Total Posts: 29 | Joined: Jun 30, 2010 - 8:43am



i did a small testing today:

first i loaded the tll-file, which i got from the the tv-set into tll-edit and saved it with no changes
this i can load to the tv-set with no problems - everything is okai

second i only changed the order in the digital-tv-area (no changes in radio-area and analog-area) and saved it
this i can load to the tv-set with no problems, but there are only the radio-programs and the analog-programms in the list
all digital-programs are gone and the list is total empty

what should i do now?

thx



Posted By: grummel2005 | Posted on: Oct 12, 2011 - 3:37am
Total Posts: 29 | Joined: Jun 30, 2010 - 8:43am



same problem here with LG32LV570S:
open the Start-In-Meneu with Remote(Menue, 1105, ok), saved the xxLV570S-ZB00002 on the USB-Device (Stick).
open the File with TllEdit 4.2 (also tryed with 4.1). in the TllEdit looks the lists broken... the first row is blank. in the second row there only 6 "things" without Name, the 3rd row there 25 channels, but ther only 3 with a name and it looks like the DVB-T Channels.

i tryed the trick with open the *.tll, save without changes (save and save as) and open again... it didn't fix it :-(

Olaf



Posted By: bootsmann67 | Posted on: Oct 14, 2011 - 12:55pm
Total Posts: 5 | Joined: Oct 14, 2011 - 12:40pm



same problem here with LG32LV570S:
open the Start-In-Meneu with Remote(Menue, 1105, ok), saved the xxLV570S-ZB00002 on the USB-Device (Stick).
open the File with TllEdit 4.2 (also tryed with 4.1). in the TllEdit looks the lists broken... the first row is blank. in the second row there only 6 "things" without Name, the 3rd row there 25 channels, but ther only 3 with a name and it looks like the DVB-T Channels.

i tryed the trick with open the *.tll, save without changes (save and save as) and open again... it didn't fix it :-(

Olaf



Look at this post:
http://forum.ixbt.com/topic.cgi?id=62:18856-120#4632




Posted By: sars | Posted on: Oct 21, 2011 - 4:01am
Total Posts: 5 | Joined: Oct 7, 2011 - 6:36am




Look at this post:
http://forum.ixbt.com/topic.cgi?id=62:18856-120#4632


thanks for your tip. but i can't read russian language....

Olaf



Posted By: bootsmann67 | Posted on: Oct 21, 2011 - 4:27am
Total Posts: 5 | Joined: Oct 14, 2011 - 12:40pm



Are the new TLLedit program for LW series. In particular I would like to take care JLevi.



Posted By: gastser | Posted on: Nov 16, 2011 - 2:21pm
Total Posts: 4 | Joined: Nov 16, 2011 - 1:57pm



Hi JLevi,

TLLEdit 4.02 does not support LW570s.
My file is xxLW570S-ZD00001.TLL, its 707KB.

How can I edit this file?

My file's link is:
http://db.tt/GZnuO8MN

Sincerely yours.

Posted By: osmosm | Posted on: Nov 18, 2011 - 12:49am
Total Posts: 3 | Joined: Nov 18, 2011 - 12:38am



actuel




Posted By: gastser | Posted on: Dec 6, 2011 - 1:45am
Total Posts: 4 | Joined: Nov 16, 2011 - 1:57pm



Little information on the television LW.
osmosm, describe that for the operator of TV you have, and what channels (digital, analog, radio, etc.). I do not have access to televisions LW. And also need more files with other operators to find patterns.



Posted By: JLevi | Posted on: Dec 13, 2011 - 9:58pm
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



Hi Jlevi,

please find my file here:
http://www.file-upload.net/download-3954664/xxLW659S-ZC00001.TLL.html

it's an LG 55LW659S, German cable & SAT, both connected

Thanks

Posted By: Waldschrat | Posted on: Dec 14, 2011 - 2:03pm
Total Posts: 1 | Joined: Dec 14, 2011 - 1:48pm



Hi Jlevi!
here is my File. i have the LG 32LV570S.
German DVBT, SAT

http://home.arcor.de/bootsmann67/xxLV570S-ZB00001.TLL

Olaf



Posted By: bootsmann67 | Posted on: Dec 15, 2011 - 9:25am
Total Posts: 5 | Joined: Oct 14, 2011 - 12:40pm



Little information on the television LW.
osmosm, describe that for the operator of TV you have, and what channels (digital, analog, radio, etc.). I do not have access to televisions LW. And also need more files with other operators to find patterns.



Hi Levi,
My TV is LG 55LW570S.
Radio, SAT, Cable TV, DTV.

I need the editor software to edit its TLL file.

Thanks.

LG

Posted By: osmosm | Posted on: Dec 15, 2011 - 3:05pm
Total Posts: 3 | Joined: Nov 18, 2011 - 12:38am



SAT channels stored not as the others. You can sort them, and rename? If possible, move several channels, and rename. We have to see what file out.



Posted By: JLevi | Posted on: Dec 17, 2011 - 1:43am
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



And also you have to look pass channels.



Posted By: JLevi | Posted on: Dec 17, 2011 - 2:04am
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



Hi Jlevi!

SAT channels stored not as the others. You can sort them, and rename? If possible, move several channels, and rename. We have to see what file out.



here some new files. i hope that files could help you.

here the untouched TLL and a Photo of the first SAT-Channels:
http://home.arcor.de/bootsmann67/xxLV570S-ZB00001.TLL
http://home.arcor.de/bootsmann67/32LV570S_1.JPG

here the TLL and a Photo where i sort 6 Channels (501 to 506):
http://home.arcor.de/bootsmann67/xxLV570S-ZB00002.TLL
http://home.arcor.de/bootsmann67/32LV570S_2.JPG

i can't rename Channels. i only could change the Channels or block it....

Olaf



Posted By: bootsmann67 | Posted on: Dec 17, 2011 - 2:47am
Total Posts: 5 | Joined: Oct 14, 2011 - 12:40pm



Posted a test version. It is necessary to check how it works.
http://www.file-upload.net/download-3978850/TllEdit5_Test.rar.html



Posted By: JLevi | Posted on: Dec 24, 2011 - 10:33pm
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



here it workes with my LG 32lv570S - to view, edit i will try later and give feedback.
great work!!!! thanks for this!

merry christmas

Olaf - from Germany



Posted By: bootsmann67 | Posted on: Dec 25, 2011 - 2:16am
Total Posts: 5 | Joined: Oct 14, 2011 - 12:40pm



I wanted to make a pass, and disposal. Files are needed tll, original, with a pass, and with the remote channel.



Posted By: JLevi | Posted on: Dec 25, 2011 - 2:51am
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



It works my LG-LW570S files, if I wasnt see channels previously Tlledit programs, I see and organize it with test tlledit5 program.
Thanks



Posted By: gastser | Posted on: Dec 25, 2011 - 3:10am
Total Posts: 4 | Joined: Nov 16, 2011 - 1:57pm



It works but needs to be developed.



Posted By: gastser | Posted on: Dec 25, 2011 - 3:17am
Total Posts: 4 | Joined: Nov 16, 2011 - 1:57pm



Don't work with LW4500. There is no channel list in TllEdit 5. With 4.02 I can see the list and I can rename channels without loosing list in TV, but if I move (sort) channels, TV don't see channels anymore. Can you make it work? I think LW4500 is Saturn 7 platform.

EDIT. Here is my channle list
http://www1.zippyshare.com/v/28974213/file.html

Posted By: ViPeR080 | Posted on: Dec 26, 2011 - 4:42am
Total Posts: 3 | Joined: Dec 26, 2011 - 4:36am



It didn't work for me too. :( (LG 47LW650s)

I used digital sattelite only during the search. Two sattelite operators were selected.

Turksat 2A/3A
Hotbird /3/6/9

Around 1700 channels were found.

Loaded the file to USB
Opened the file in computer with TLLedit v4.0.2, channels could not be seen
Opened the file in computer with TLLedit v5test this time, channels are seen.
I changed the order of the files. No renames are done (I still don't know how to do that)
Loaded the edited file to the TV

The result was catastrophic.

No channels could be found by the TV although the file was uploaded successfully.
Tv wanted to initiate an autosearch for channels but settings were all messed up. Cannot auto or manual search channels, cannot create search profiles. Menus started to freeze. TV-link Loader page cannot be accessed since menu commands were not working so I coul not upload the original file to the Tv to correct the problem. I had to reset to factory presets to get back to normal function of the menus.

I suspect this is related to country settings or ordering. It seems like editing the order of the channels messes up the file somehow. One friend in this topic said he has successsfully edited his files with Tlledit5test for LW570s which is identical to my model. If the same model TV and same version of the editor is working for one of us and not the other it should be country related.

One other information that might be handy is when I moved multiple channels with Ctrl at the same time oddly there were two channels numbered as 5 and two as 6.

I mean like this:

1
2
3
4
5 CNN
5 CNBC
6 DISCOVERY
6 ANIMAL PLANET
7
8

I know that two channels cannot have the same number so I have used the auto numbering command in the edit menu and this sorted the double numbering problem. But it may have corrupted the file somehow.

Here are the original and edited files for you to check.

http://www.sendspace.com/file/exmxur

I hope this helps.

And thank you for your great efforts to develop this.



Posted By: alien2000a | Posted on: Dec 27, 2011 - 8:00pm
Total Posts: 13 | Joined: Dec 27, 2011 - 7:44pm



alien2000a
Try to move the channels on the TV and send the files to move and after.
I do not have access to TV sets in this series, and there is no information. It is necessary to compare the TLL files and look for changes, which makes the TV, when moving, skipping, deleting, etc.
To change the channel name in the program just double click on the name, just change the number.



Posted By: JLevi | Posted on: Dec 27, 2011 - 9:33pm
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



Thank you very much for the answer Jlevi.

Although you don't have access to the LW series I can help you with mine if you tell me wha you need.

And may I ask two questions to be sure:

1- I couldn't understand what you've meant bu this: "Try to move the channels on the TV and send the files to move and after." Could you please explain this?

2- How do I open and look at the wo versions. A hex editor? I tried this but everything is garbled. Can you tell me which program to use best for this purpose.

Thanks again.





Posted By: alien2000a | Posted on: Dec 28, 2011 - 2:20pm
Total Posts: 13 | Joined: Dec 27, 2011 - 7:44pm



Am writing through the translator, do not speak English. It turns out badly.
1. - Make changes on the TV. See how it makes the TV. We need two files before and after the change. We have to change numbers, delete, make a pass, etc. And describe what did.
2. - Program TLLEdit. , Block 4, this is the satellite channels. Right-click on a channel, select . It's a dump of a single channel. You can open multiple channels at once.



Posted By: JLevi | Posted on: Dec 28, 2011 - 3:15pm
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



Hi again my friend,

I am sending you two files.

http://www.sendspace.com/file/ipt9vc

xxLW650S-ZC00001 - Original File from TV
xxLW650S-ZC00002 - Edited file from TV. (Moved first channel, blocked second channel)

I am also sending you the pictures of the screen for Sattelite List, Audio List and Country List.

Does Tlledit use the type.ini file?

I realise that all other TV's are set to a country code but LW part is set to Country=0

[DOC_LW]
nummerBlock=2
sizeBlock=35504
nMOREblock=0

nTVblock=1
nDTVblock=3
nDTVSblock=4
sizehannel=182
sizehannelS=68
sizeDTVSBlock=687880

Nummer=12
System=24
Channel=26
Band=27
Name1=30
Size_name=70
Symbol_rate=0
Modulation=0
Frequency=0
ID=0
Status=0
Name2=136
Skip=0

NummerS=4
Name1S=16
Size_nameS=15
IDS=0
StatusS=0
Name2S=0
SkipS=0
readOnlyS=1

Country=0
MenuLanguage=0
AudioLanguage1=0
AudioLanguage2=0
SubtitleLanguage1=0
SubtitleLanguage2=0
MenuItem=0
TimeZone=0
TimeShift=0
DigitalAudioOut=0


I still think it is a country related problem. After I edit the file on computer and upload to TV these errors occur

1- No sattelite names are found
2- TV clock changes to a different timezone and shows a different time than I set up
3- Without factory reset which deletes the channel list TV cannot search channels.

Thank you for your help please help us to get this wonderful program work for LW570s and 650s



Posted By: alien2000a | Posted on: Dec 28, 2011 - 4:08pm
Total Posts: 13 | Joined: Dec 27, 2011 - 7:44pm



JLevi, what about my case? Can you make it work? I sent you my list of channels. LW4500 is without satellite tuner (Only Analog and DVB-T/DVB-C).



Posted By: ViPeR080 | Posted on: Dec 29, 2011 - 4:30am
Total Posts: 3 | Joined: Dec 26, 2011 - 4:36am



ViPeR080
http://www.file-upload.net/download-3987135/Type.ini.html



Posted By: JLevi | Posted on: Dec 29, 2011 - 5:45am
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



JLevi,
By the way, your account at my ftp still working
(if You are forget password - just email me new one)




Posted By: Drew99 | Posted on: Dec 29, 2011 - 6:32am
Total Posts: 109 | Joined: Dec 17, 2009 - 11:56am



JLevi, thank you very much! It's working. I can finally sort my channels.



Posted By: ViPeR080 | Posted on: Dec 29, 2011 - 7:00am
Total Posts: 3 | Joined: Dec 26, 2011 - 4:36am



Great work Jlevi.

I'm glad the problemis solved for Viper080's LW4500. Do you think I should use the same ini file for my LW650s as the only difference is with the sattelite tuner?

Or should I wait for an update from you?

Thanks.

Edit: I couldn't resist and tried Viper's ini file. It still does not work for me :(

Posted By: alien2000a | Posted on: Dec 29, 2011 - 9:04am
Total Posts: 13 | Joined: Dec 27, 2011 - 7:44pm



In the ini file contains the addresses of known configuration. Zero indicates that the address is unknown. The program ignores this parameter.
I can not understand why not working. I think that it is connected with a large Number of channels. How many satellite TV shows?



Posted By: JLevi | Posted on: Dec 29, 2011 - 10:12am
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



Currently there are 1600+ channels found.

With the last ini file you've sent time change problem is solved but channels are still not recognised.



Posted By: alien2000a | Posted on: Dec 29, 2011 - 1:31pm
Total Posts: 13 | Joined: Dec 27, 2011 - 7:44pm



Hi Jlevi,

I couldn't get a reply from you. Will you help solve the problem for LW570 and 650 series? Please we need it.
Thank you.



Posted By: alien2000a | Posted on: Dec 30, 2011 - 5:22pm
Total Posts: 13 | Joined: Dec 27, 2011 - 7:44pm



alien2000a
I can not find the problem. Try the program to transfer multiple channels. Do not touch "5 - SHOW TV" and "6 - ALEM FM". It is my problem with them.
Time and country are in block 2, all satellite settings are in block 4.



Posted By: JLevi | Posted on: Dec 30, 2011 - 9:06pm
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



Hello Jlevi,

is't possible to explain what do you mean the each parameter in Type.ini configuration file? Im from Czech Republic and I would like use this program to sort all of my satellite channels (only them). Im be afraid to lost the channels in my TV (during end of year:-)) after load edited ttl file like alien2000a member Posted on: Dec 28, 2011 - 4:08pm (1- No sattelite names are found, 2- TV clock changes to a different timezone and shows a different time than I set up 3- Without factory reset which deletes the channel list TV cannot search channels.)



My file is uploaded on: http://www.uloz.to/12119870/xxlw650s-zc00001-zip

Thanks d2mac



Posted By: d2mac | Posted on: Dec 31, 2011 - 12:32am
Total Posts: 9 | Joined: Dec 30, 2011 - 11:45pm



Thanks very much for this programm. But in test version 5 don't change language interface. I've tested in 22LE5500. Works fine. Later i'll test it in LW575s and write.



Posted By: Lvbnhbq19 | Posted on: Jan 2, 2012 - 3:15pm
Total Posts: 4 | Joined: Jan 2, 2012 - 2:52pm



This is only a test version. Translation is. It is necessary to further develop the program.



Posted By: JLevi | Posted on: Jan 3, 2012 - 12:37am
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



JLevi -- please hurry up for tv platfotm 570s list editor



Posted By: decklen | Posted on: Jan 5, 2012 - 5:54am
Total Posts: 7 | Joined: Jan 3, 2012 - 7:29pm



Some files that were sent were not whole. Try to download the file from the TV, TLL, and then upload it back to telavizor. How does he behave.



Posted By: JLevi | Posted on: Jan 5, 2012 - 9:10am
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



Hi JLevi,

I have updated my 650s version to the latest firmware. Here's the original files from the TV from the new firmware. When I try to load it in TLL there is still two 5's and to 6's.

Let's see if you can see any difference in the new files.

I'm sure ALEM FM on row 6 is not there on my TV but it shows there afte loaded in TLL.

http://www.sendspace.com/file/2c0mr7





Posted By: alien2000a | Posted on: Jan 5, 2012 - 10:58am
Total Posts: 13 | Joined: Dec 27, 2011 - 7:44pm



Where a file in the archive?



Posted By: JLevi | Posted on: Jan 5, 2012 - 12:28pm
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



I've tested on my 42LW575S for analog channels. Works fine! Thanks a lot! One question. Programm has 5 column. First - analog channel. What for next 4 column? Thanks.



Posted By: Lvbnhbq19 | Posted on: Jan 5, 2012 - 12:32pm
Total Posts: 4 | Joined: Jan 2, 2012 - 2:52pm



Lvbnhbq19
1 column - analog TV, digital radio and then TV, then satellite TV and radio. If it works for you, please file tll.



Posted By: JLevi | Posted on: Jan 5, 2012 - 12:40pm
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



Ok. I understand, but I don't have channel besides analog. Thank you very much for your explanations and programm.



Posted By: Lvbnhbq19 | Posted on: Jan 5, 2012 - 12:48pm
Total Posts: 4 | Joined: Jan 2, 2012 - 2:52pm



Lvbnhbq19, tll need a file that is loaded into the TV well LW575S. We need to look where are the settings.



Posted By: JLevi | Posted on: Jan 5, 2012 - 1:27pm
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



Lvbnhbq19, tll need a file that is loaded into the TV well LW575S. We need to look where are the settings.



Lvbnhbq19. Jlevi needs you to send the tll file you dowloaded and edited with tll editor. Your tv is the same series as some of us and tll edit doesnt work for us. It must be country settings which causes the problem. Please upload it to a file sharing site and post the link here for jlevi to examine the setting parameters.

Thanks



Posted By: alien2000a | Posted on: Jan 5, 2012 - 3:07pm
Total Posts: 13 | Joined: Dec 27, 2011 - 7:44pm



Here it is:
for 42LW575s: http://depositfiles.com/files/1guq5e4nq
for 22LE5500: http://depositfiles.com/files/g4r9edyly

All files were edited in TllEdit version 5. Caracter - cirillic, Prefix (P) - pressed.



Posted By: Lvbnhbq19 | Posted on: Jan 6, 2012 - 12:45am
Total Posts: 4 | Joined: Jan 2, 2012 - 2:52pm



file from LW570s

http://sendfile.pl/125674/xxLW570S-ZD00001.TLL



Posted By: decklen | Posted on: Jan 6, 2012 - 5:32am
Total Posts: 7 | Joined: Jan 3, 2012 - 7:29pm



http://www.file-upload.net/download-4007935/TllEdit5_Test_2.rar.html



Posted By: JLevi | Posted on: Jan 6, 2012 - 7:53am
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



http://www.file-upload.net/download-4007935/TllEdit5_Test_2.rar.html


I've tried your new version of TllEdit5_Test2 and still no channels and satelite setting found in the TV after uploading.
Now there is option to delete and sort channels in the your program. It's good, but something little bit improve to the end

Try download and look on attached ttl files (original and edited) and photos.

http://www.file-upload.net/download-4009097/lw650s_ttl.zip.html

TV LG LW650s

Thanks



Posted By: d2mac | Posted on: Jan 6, 2012 - 2:11pm
Total Posts: 9 | Joined: Dec 30, 2011 - 11:45pm



Found 4 bytes that change when you change the channel list. I can not find the formula. In my opinion this is the checksum. We need a few files:
- the original
- Once again taken the original
- With one missing channel
- With one channel of the displaced

Changes should be minor. So it will be easier to find a dependency.



Posted By: JLevi | Posted on: Jan 6, 2012 - 4:26pm
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



bad :(
edited : 0 number is deleted

http://sendfile.pl/125912/xxLW570S.rar



Posted By: decklen | Posted on: Jan 6, 2012 - 7:49pm
Total Posts: 7 | Joined: Jan 3, 2012 - 7:29pm



Found 4 bytes that change when you change the channel list. I can not find the formula. In my opinion this is the checksum. We need a few files:
- the original
- Once again taken the original
- With one missing channel
- With one channel of the displaced

Changes should be minor. So it will be easier to find a dependency.



Hi JLevi,

there are a few files which may help to you:

http://www.file-upload.net/download-4009944/lw650s_ttl_2.zip.html

Each of the ttl file have an own picture with detailed description too.

I edited just one channel from the my list only (according your wishes)





Posted By: d2mac | Posted on: Jan 7, 2012 - 1:34am
Total Posts: 9 | Joined: Dec 30, 2011 - 11:45pm



Edit need the TV. It is necessary to calculate the TLL format file. And for this we must make changes in the channel list download TLL file and compare it to the hex editor. And also need to download two files TLL unchanged channels. I have no TV in this series, so I can not do that.



Posted By: JLevi | Posted on: Jan 7, 2012 - 3:44am
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



Edit need the TV. It is necessary to calculate the TLL format file. And for this we must make changes in the channel list download TLL file and compare it to the hex editor. And also need to download two files TLL unchanged channels. I have no TV in this series, so I can not do that.



JLevi,

I'm very sorry. I didn't understand you before.
Now I uploaded three ttl files edited in the TV only.

1. xxLW650S-ZC00005.TLL - EUROSPORT HD in possition 77
2. xxLW650S-ZC00006.TLL - EUROSPORT HD in possition 78 (moved from 77)
3. xxLW650S-ZC00007.TLL - EUROSPORT HD in possition 78 set as skipped channel (blue text in channel's list in the tv)


there is the link: http://www.file-upload.net/download-4010069/lw650s_ttl_v3.zip.html

You need to download two files TLL unchanged channels. What do you mean by it?

Thanks



Posted By: d2mac | Posted on: Jan 7, 2012 - 4:12am
Total Posts: 9 | Joined: Dec 30, 2011 - 11:45pm



as i understand, JLevi asked two unchanged files created continuously to check some internal things like checksums, timemarks etc.

one file with changed/moved channel
one - with deleted channel






Posted By: Drew99 | Posted on: Jan 7, 2012 - 4:20am
Total Posts: 109 | Joined: Dec 17, 2009 - 11:56am



as i understand, JLevi asked two unchanged files created continuously to check some internal things like checksums, timemarks etc.

one file with changed/moved channel
one - with deleted channel





So I think, it I did. TV LG LW650s does not allow delete DVB-T and DVB-S/S2 channels. Only analog channels.
It must be enough what I did. I hope

We will see...



Posted By: d2mac | Posted on: Jan 7, 2012 - 4:45am
Total Posts: 9 | Joined: Dec 30, 2011 - 11:45pm



I've got a 47LV570S and am able to load TTl files by TTLEdit5_Test and TTLEdit5_Test2 but not by previous versions.

I downloaded fileset number 1 from the TV's hotel menu, swapped the first two digital cable channels (channel 1 and 2) in TTLEdit's column 3, saved the channel list under the new number 2, uploaded the file back to the TV and changed the TV to ID set 2 but the channel list stays the same. Checked with both versions TTLEdit5_Test and TTLEdit5_Test2.

I upload two TTL sets I downloaded from my TV (http://www.file-upload.net/download-4010138/47LV570S.zip.html).

File number 1 ist the original setting, file 2 has the first two digital cable channels swapped (which I did on the TV).



Posted By: spi268 | Posted on: Jan 7, 2012 - 4:52am
Total Posts: 4 | Joined: Jan 7, 2012 - 2:53am



Forgot to mention. I'm on 5.01.10 firmware with the 47LV570S.



Posted By: spi268 | Posted on: Jan 7, 2012 - 4:59am
Total Posts: 4 | Joined: Jan 7, 2012 - 2:53am



spi268
A whole lot skipped channels?

Try to fill in the original TV TLL file. (Download a file from the TV, and pour it directly into the TV, without changes, will set or not).



Posted By: JLevi | Posted on: Jan 7, 2012 - 5:46am
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



47Lw570s poland soft 5.10.2

1. first oryginal file - xxLW570S-ZD00001.TLL
2. second oryginal file - xxLW570S-ZD00002.TLL
3. file with (in sat list pr 1-pr 1586) program 1 canal+ change to 16 file - xxLW570S-ZD00003.TLL
4. file with (in sat list) program 16 canal+ change to 1 file - xxLW570S-ZD00004.TLL
5. file with (in sat list) program 1 canal+ change to last 1587 file - xxLW570S-ZD00005.TLL (tv see only 1587 programs in edit list mod without pr nr 1)

files edited on tv not in program!!!!

http://sendfile.pl/126042/xxLW570S.rar



Posted By: decklen | Posted on: Jan 7, 2012 - 8:10am
Total Posts: 7 | Joined: Jan 3, 2012 - 7:29pm



spi268
A whole lot skipped channels?

Try to fill in the original TV TLL file. (Download a file from the TV, and pour it directly into the TV, without changes, will set or not).



Both files from http://www.file-upload.net/download-4010138/47LV570S.zip.html are downloaded directly from my TV.

xxLV570S-ZB00001.TLL was the first file I downloaded.
In xxLV570S-ZB00002.TLL I changed the order of the first two digital DVB-C channels on the TV itself and downloaded that later from the TV. That's the only difference betwenn both files.

For xxLV570S-ZB00099.TLL (download here http://www.file-upload.net/download-4010978/xxLV570S-ZB00099.TLL.html) I took xxLV570S-ZB00001.TLL as input for TLLEdit5_Test2 and also changed the order of the first two digital DVB-C channels (in the 3rd column). xxLV570S-ZB00099.TLL then should more or less be the same as xxLV570S-ZB00002.TLL.

If I upload xxLV570S-ZB00001.TLL and xxLV570S-ZB00002.TLL back to the TV I see the changed order of programs.
If I upload xxLV570S-ZB00099.TLL back to the TV there is no chnage in order at all - despite the fact if I enable or disable the automatic update of digital channels.



Posted By: spi268 | Posted on: Jan 7, 2012 - 10:13am
Total Posts: 4 | Joined: Jan 7, 2012 - 2:53am



Go on the next test version. Satellite channels are not supported. Finalized the digital channels. And as a Hex editor.
For satellite channels: Meny - File - Block view HEX, select the unit number 4. It is necessary to clarify the appointment of four bytes at 01BBE0h.
http://www.file-upload.net/download-4011518/TllEdit5_Test_3.rar.html



Posted By: JLevi | Posted on: Jan 7, 2012 - 1:07pm
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



I found a checksum. I tried to support the satellite channels.
http://www.file-upload.net/download-4012138/TllEdit5_Test_4.rar.html



Posted By: JLevi | Posted on: Jan 7, 2012 - 5:17pm
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



this upload dont work Jlevi !!!




Posted By: decklen | Posted on: Jan 7, 2012 - 6:35pm
Total Posts: 7 | Joined: Jan 3, 2012 - 7:29pm



I found a checksum. I tried to support the satellite channels.
http://www.file-upload.net/download-4012138/TllEdit5_Test_4.rar.html



Hi JLevi,

GOOD WORK GUY! It already works for me (LG LW650s) in night build of version TllEdit5_Test_4
All satellite channels are sorting as well as I needed


Some satellite channels are double after loading ttl files back to the program and DVB-T channels are not in list at all, but it's unimportant in this time for me

BIG THANKS




Posted By: d2mac | Posted on: Jan 8, 2012 - 2:50am
Total Posts: 9 | Joined: Dec 30, 2011 - 11:45pm



ok


http://www.file-upload.net/download-4010138/TllEdit5_Test_4.rar.html .html

Posted By: decklen | Posted on: Jan 8, 2012 - 5:41am
Total Posts: 7 | Joined: Jan 3, 2012 - 7:29pm



Great work JLEvi.

Thanks for the hard work. We can now load all the TLL edited files into our TV's without any problems. There are still some minor bugs which I think we can solve together.

Here are my latest files:

http://www.sendspace.com/file/ypjw0l


xxLW650S-ZC00010 fresh file from the TV
xxLW650S-ZC00011 same file loaded to Tv and downloaded back without any changes
xxLW650S-ZC00012 file edited with TLL and loads successfully to the TV

However there are still some small problems:

1- Channels not shown on the TV shows everything correctly in TLL edit. This means your software is working much better than the LG TV firmware. Well done.

2- TLL creates duplicate files like there are two 113 and three 115. I had to delete them one by one in TLL edit and when I load it to the TV there are no problems. But why do we get multiple channels listed in TLL although it is not there on the TV?

3- I had to use the autonumbering command in TLL to get the numbers right and it works perfectly. Great tool.

4-There is still a firmware related problem. Although I see around 1000 files in the TLL edited file when I load it onto TV there are only 405 of them visible which are only from sattelite 1 (Turksat). Channels from Sattelite 2 (Hotbird) are in the TLL list but not shown on the TV. Is the sattelite information written in the TLL file somehow. The TV keeps loosing it so how can we make sure that the second sattelite information is correctly written in the TLL file.

Thanks.



Posted By: alien2000a | Posted on: Jan 8, 2012 - 4:52pm
Total Posts: 13 | Joined: Dec 27, 2011 - 7:44pm



Thank you all for your help. I will begin to gather a working version.

alien2000a
What are the names and numbers of several satellite channels 1 (Turksat) and 2 satellite (Hotbird). I'll try to find the cause.



Posted By: JLevi | Posted on: Jan 8, 2012 - 9:27pm
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



Hi JLevi,

In the files I've sent you yesterday the latest version was xxLW650S-ZC00012.TLL. In that file channels numbered from 1 to 403 are all from Turksat. All channels after 403 are Hotbird but they don't show in the TV.

Thank you very much.

Once you finalise the software I think LG should pay you forthis software and make it a standard tool for LG



Posted By: alien2000a | Posted on: Jan 9, 2012 - 8:31am
Total Posts: 13 | Joined: Dec 27, 2011 - 7:44pm



TllEdit5. .
Drew99, . .

http://www.file-upload.net/download-4016409/Setup.msi.html



Posted By: JLevi | Posted on: Jan 9, 2012 - 11:26am
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



JLevi,

Your message does not read corretly.



Posted By: alien2000a | Posted on: Jan 9, 2012 - 12:16pm
Total Posts: 13 | Joined: Dec 27, 2011 - 7:44pm



http://www.sendspace.com/file/g9hkc4



Posted By: JLevi | Posted on: Jan 9, 2012 - 12:26pm
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



Thanks a lot. Is this TllEdit test 4 or a newer version?

And is it possible to includse English Setup laguage for the future.

Thanks.



Posted By: alien2000a | Posted on: Jan 9, 2012 - 12:54pm
Total Posts: 13 | Joined: Dec 27, 2011 - 7:44pm



Incorrectly compiled. TllEdit version 5.0 working.
The installation is now in English.
http://www.sendspace.com/file/kk27ta



Posted By: JLevi | Posted on: Jan 9, 2012 - 1:27pm
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



JLevi, I can't install your file - (win7 x64)

Error message:
________________________________________________________________
Unable to locate application file 'Setup.msi'.

See the setup log file located at '%my temp dir%\install.log' for more information.
_________________________________________________________________________


Can You make "old installer" (self extract archive)



Posted By: Drew99 | Posted on: Jan 9, 2012 - 3:06pm
Total Posts: 109 | Joined: Dec 17, 2009 - 11:56am



The same, but in a simple archive.

http://www.sendspace.com/file/9zoymg

Posted By: JLevi | Posted on: Jan 9, 2012 - 3:32pm
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



Thank You!

Update file stores and readme file. (actual links at first post)



Posted By: Drew99 | Posted on: Jan 9, 2012 - 4:15pm
Total Posts: 109 | Joined: Dec 17, 2009 - 11:56am



JLevi,

what about showing also channel's frequency etc. "freque.=11836MHz, polar.=H, FEC=5/6, symb.r.=27500 " in the program "TllEdit"? There is channel's name and order number only.

It's possible?

Thanks



Posted By: d2mac | Posted on: Jan 11, 2012 - 10:18am
Total Posts: 9 | Joined: Dec 30, 2011 - 11:45pm



Hi JLevi,

in some previous version of your program you provide a source code. It's possible to do it now for the new version of TllEdit 5.0?

Thank you for your answer.



Posted By: d2mac | Posted on: Jan 15, 2012 - 1:57pm
Total Posts: 9 | Joined: Dec 30, 2011 - 11:45pm



source code
http://www.sendspace.com/file/ukf9fh



Posted By: JLevi | Posted on: Jan 15, 2012 - 2:56pm
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



There seems to be a little bit problem with deleted DVB-S channels by TllEdit v.5. in my TV. Deleted channels are automatically added to the TV again as well as you get right frequency during watching TV (set of channels for one frequency). My opinion is mark them as skipped channels. Don't waste your time deleting your channels! Maybe there's a solution but I don't know whethere in the TV or the program:(



Posted By: d2mac | Posted on: Jan 22, 2012 - 3:07am
Total Posts: 9 | Joined: Dec 30, 2011 - 11:45pm



Hi JLevi,

did TllEdit also support the PZ-Series ? I testet it and it seems that it don't work.

Here are my TLL-File: http://www.sendspace.com/file/9sqpev

It will be cool if you can make your editor work with the newer Series ...

Kind regards

Kroki



Posted By: kroki | Posted on: Jan 26, 2012 - 2:08pm
Total Posts: 1 | Joined: Jan 26, 2012 - 1:58pm



In the file type.ini need to add section:

[CHANNEL_PW]
sizeChannel=180

Nummer=12
System=0
Channel=0
Band=0
Name1=30
Size_name=70
Symbol_rate=0
Modulation=0
Frequency=0
ID=120
Status=0
Name2=132
Skip=0




Posted By: JLevi | Posted on: Jan 30, 2012 - 6:41pm
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



I have an LG 42PT353
The applicaion somehow does not work, it shows all zeros.



Posted By: MarioAL | Posted on: Feb 22, 2012 - 9:32am
Total Posts: 7 | Joined: Feb 22, 2012 - 9:28am




MarioAL

Need a file tll



Posted By: JLevi | Posted on: Feb 23, 2012 - 11:52am
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



http://www.box.com/s/o96quikuqmt6balop2fo



Posted By: MarioAL | Posted on: Feb 23, 2012 - 12:18pm
Total Posts: 7 | Joined: Feb 22, 2012 - 9:28am



You will also need to add file type.ini section
[CHANNEL_PW]
(see post above)




Posted By: JLevi | Posted on: Feb 23, 2012 - 1:55pm
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



Add where?



Posted By: MarioAL | Posted on: Feb 23, 2012 - 2:03pm
Total Posts: 7 | Joined: Feb 22, 2012 - 9:28am



Menu - Edit - Edit INI

Add at end of file:

[CHANNEL_PW]
sizeChannel=180

Nummer=12
System=24
Channel=26
Band=27
Name1=30
Size_name=70
Symbol_rate=0
Modulation=0
Frequency=0
ID=120
Status=0
Name2=132
Skip=0




Posted By: JLevi | Posted on: Feb 23, 2012 - 2:08pm
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



I'm trying to edit it, but thee buttons say Restore, ?? and ??????, neither of those seem to work, because when I reopen it, the section disappears.



Posted By: MarioAL | Posted on: Feb 23, 2012 - 2:14pm
Total Posts: 7 | Joined: Feb 22, 2012 - 9:28am



TllEdit 5.1
http://www.sendspace.com/file/vob1lt



Posted By: JLevi | Posted on: Feb 23, 2012 - 7:26pm
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



It still doesn't work, actually, now all the text disappeared.



Posted By: MarioAL | Posted on: Feb 24, 2012 - 2:18am
Total Posts: 7 | Joined: Feb 22, 2012 - 9:28am



after adding [CHANNEL_PW] section to type.ini is TllEdit with "xxPT353-ZA00001.TLL" fully functional. Section can by added to the end of .ini file with any editor (notepad.exe,...)



Posted By: king555 | Posted on: Feb 24, 2012 - 3:35am
Total Posts: 1 | Joined: Feb 24, 2012 - 3:29am



It works now, thank you very much.



Posted By: MarioAL | Posted on: Feb 24, 2012 - 5:07am
Total Posts: 7 | Joined: Feb 22, 2012 - 9:28am



Sorry, wrong link written.
update:
http://www.sendspace.com/file/f59prd

File type.ini contains all known addresses in the configuration file. It can be edited. Addresses found in the hex editor. This is a long and tedious. You can view directly in the program, right-click on the channel. At the same time you can view multiple channels for comparison.



Posted By: JLevi | Posted on: Feb 24, 2012 - 1:20pm
Total Posts: 59 | Joined: Feb 25, 2010 - 10:36pm



Hi Jlevi, thank you for great work.
I have LG 55LW570S. S mean satellite.

Sometimes going through some channels encrypted broadcast.
This problem is an external satellite receivers "biss key" can be solved by entering.
My device has built-in receiver.
How can I enter to LG's TV built-in satellite receiver?

Thanks.

LG

Posted By: osmosm | Posted on: Feb 26, 2012 - 12:23pm
Total Posts: 3 | Joined: Nov 18, 2011 - 12:38am